Skip to main content
Skip to main content

What Happened?

A worker was fatally injured during water transfer operations. As a layflat hose was being filled during the initial line fill, a section of the line moved from flat ground onto a sloped berm.

The weight of the water pulled that section further down the slope, drawing the rest of the hose into the low ground as it went. The worker was caught and pinned as the hose rolled into the low ground. Despite immediate emergency response, the worker did not survive.

Aerial view of an industrial containment pond surrounded by earthen berms, access roads, and forested land.
  • The layflat hose moved from flat ground to a slope; once part of the line was on the slope, the water weight pulled that section downhill, drawing the rest of the hose with it.
  • The potential risk of ground-surface movement to a slope had not been considered as potential hazard.
  • As a result, the flat-to-slope transition on this route had no control applied.

Submit your safety alert

Help industry by sharing lessons learned from an incident.

Related Learning Opportunities

Share: